It would work fine without Cloudflare. The server is running the current version of OpenBSD, so it could be configured to safely host a website without any tunnels.

Mumble will do all of that except screen sharing. Only the server has to deal with NAT.

Don’t rely on the VPN kill switch for torrenting. It’s not fast enough to prevent your IP from leaking if the VPN disconnects. The torrent client needs to be bound to the VPN interface. Transmission doesn’t have an option to do that, so you would have to run it in a container instead.

It’s also most certainly against the terms of service for your ISP, VPN or VPS, so you could get your service terminated.

Running something like this will put a big target on your back. I hope you have your network locked down tight.

I’ve been using their access points for a long time. They have been working quite well. I do have an old WiFi 5 AP that’s starting to fail, but that’s not too surprising considering the age.

I’ve just been running the controller with a local account. Hopefully they won’t try to force me into using a cloud account.

If someone gets into your PC, you have much bigger problems than them reading the system logs.

Does that wheel assembly even contain the switch? Every mouse I’ve repaired has had a small SMD tact switch on the PCB for the middle button.

To find a replacement switch, I go to Digikey or Mouser, filter by the approximate size, then look through the pictures until I find something that looks right. Then I download the datasheet and check the exact dimensions to see if it will fit. Tact switches are cheap, so order a bunch. I usually have to replace them every few years. If they are available with different actuation forces, get several different ones to try out.

Gaming on Linux has been really good for the last several years. The main issue is certain multiplayer games that intentionally block Linux users.

Nobara and Bazzite are gaming focused distributions, but they are both based on Fedora. OpenSUSE Tumbleweed will give you the lastest kernel version if you want a rolling release distro.

Mint has a software manager and you can also install Synaptic.

Gaming on Mint works fine, but it’s based on Ubuntu LTS releases, so you won’t have the latest kernel or mesa versions. If you’re using an RX 9000 series GPU, you should probably pick a distro with a newer kernel and mesa version to get the best performance.

It’s good for basic things like cutting, merging and transitions. It can be used to blur something as long as it’s not moving.

There’s always KolibriOS. It’s small enough to run from a single floppy disk.

I’ve got some games that are choppy with mitigations on, but they run smooth with mitigations off. I do temporarily disable the mitigations when playing those games, it’s just inconvenient since it requires a reboot.

I’m still running a 1950x in my desktop. It works fine for most stuff, but the gaming performance is a bit low now with all of the spectre mitigations. I was planning on upgrading, but that will have to wait a few more years now.

I ran my previous laptop from 2012 until it died last year. I used it as my electronics workbench PC for several years because the battery wouldn’t hold a charge, but it still worked fine for running KiCAD and programming microcontrollers. I replaced it with a used Thinkcentre that I got dirt cheap on ebay just before the RAM prices went crazy.

MeshCore runs at 2.73 kbps and it can send a short text message in a fraction of a second. The short turbo preset on Meshtastic is 21.88 kbps, but that’s still too slow for images. The higher speed reduces the range by quite a bit too.

For images, you would be better off using WiFi HaLow, which runs several mbps on 900 MHz.

If you have a ham license, there is HamWAN and ARDEN as well. They are fast enough to stream live video. They can work over long distances, but the high gain antennas have to be aimed carefully.

It’s not going to make a very good NAS. It looks like it only has USB 2 and 100M ethernet. That’s going to be slower than the NAS I built with the Pentium 4 desktop I got for free in 2007.

The DNS authoratative servers are what hold all of the records for your domain. With Cloudflare, you are stuck with theirs. As for why you want to use a different one, maybe you need more than the 200 records Cloudflare limits you to. Maybe you don’t like the way their API works for automating updates. Maybe you don’t want to set up all of your records all over again if you transfer your domain to another registrar. Maybe you just don’t like Cloudflare.

A .com domain should be under USD $12 a year with WHOIS privacy included. If someone is charging more than that, they are ripping you off. Most web or VPS hosts will charge a significant markup if they sell domains. Make sure you check the renewal price too. Some registrars will give you the first year cheap, then charge significantly more to renew it.

Cloudflare is the cheapest, but they force you to use their DNS servers. Porkbun is a dollar more, but you can use your own DNS if you want to.

A switching power supply should be regulated. The one you have is defective. Some do have a minimum load, but I’ve never seen that on an adapter that can be unplugged from the load.

A linear power supply has a linear regulator and will supply its rated voltage with very little ripple. The unregulated power supplies are just a transformer, rectifier & capacitor. They only provide their rated voltage when they are supplying their full rated current and there will be a lot of ripple.