Heheh

I love doing little edits like this:

Took a quick look at the free tier,

• 3 users
• 100 devices
• Basically all tailscale features

That seems pretty reasonable to me. Main account and two accounts to share. With just friends and family, I doubt most people will reach the 100 device limit.

Wipur is the next big deal, but Boodle is likely to replace it. Slove is already dying, but iMPUR and Doofz look promising as replacements.

Yeah. I remember using a custom keyboard back when I had an iPhone 4S lol

Turns out, it’s illegal to remove them in the US:

I’ll be leaving the cowbird egg in the nest, but will keep a close eye on the other eggs.

I’ve heard that the cowbird will retaliate if it finds its egg missing. Won’t that happen?

Well dang…

Hopefully the Robin babies do alright.

Is that for real? How would there be two species of eggs together? Is it common?

Yup. Best solution I’ve heard of for stuff like this out climbing in the drier is to scare the ever living daylight out of them (without doing any actual harm).

In this scenario, I would “trap” their arm with something like a notebook, make a loud racket in the fridge, and maybe even shake the door a bunch.

For something like a clothes drier, I would slap the machine a lot and shake it all about.

Basically, scare them enough that they lose all desire to do it again. Sucks to have to do it, but it’s not like you can sit them down and have a chat about the dangers of machines…

Makes me wonder if Valve saw that and got some inspiration for Half Life…

Your order is correct!

With the help of the other comment suggesting to measure the voltage of VCC, I was able to verify all the pins were working.

I have the pin order now!

I (very carefully) tested the pins for a brief moment to verify it all was working.

First I verified the voltage of vcc as 3.5v. Red to that and black to ground worked with no problems.

I figured the blue was probably in it’s correct place so I tried it and got video.

Quick test with green have me LED power.

The male part of the plug is borked, so I’ll just solder the wires on. Might even fashion up my own plug if I’m feeling fancy. I’m sure I got some spare connectors lying around somewhere.

Sadly didn’t find any. Even looked at other camera scores in the similar budget range with the hopes that the camera part is reused on other devices. No luck. Not many teardowns of scope cameras.

It’s a bit old and on the budget side. I’ll keep that in mind as a last resort.

The label is for the through holes, but I did confirm the corresponding pins for the plug with my multimeter.

I don’t believe the pins in the cable are in the right places. I guess they were reinserted wrong when it was first opened up. Pin 2 is definitely a dead pin. I confirmed the ground pin to the battery connection.

We just surpassed 1k MAU, so I’m real happy 😊

My guess has a few factors to it (in no particular order):

Cost soda syrup is likely a lot cheaper than the chemical concoction for energy drinks.

Safety Energy drinks pose a much greater health risk if the concentrations are off. Companies would have to prevent young children from accessing the machines (if they are used in restaurants). They would also have to prevent customers from drinking too much. I can also imagine chugging a bunch of the syrup would likely kill you (it’s bound to happen).

Flavor Control soda companies already accept and plan for the difference in fountain vs bottled sodas. I feel energy drink companies want as much control as possible to keep their brand image perfect.

I always like it when it pops up on my feed

Thanks 😊

I have. Made a post there a week or two ago.