Okay, what’s the biggest and most active gamer community on Matrix?
As far as I know, https://friendlylinuxplayers.org/ . I’m sure it’s not as active as whatever Discord communities you’re in but it’s fairly active and actually friendly.
I use mkinitcpio. You mean regenerating the initramfs? If so, yeah I’ve done that a few times without much success. I suppose reinstalling the bootloader could be an option but I’ve tried using a live ISO from another distro (Ubuntu) and the problem still manifested itself. But it is something to keep in mind, so thanks.
Anyway, so far it seems to be a faulty PCIe slot, so I changed the GPU to another slot and things seem to be working fine. But I’ll wait until tomorrow to do a final edit to my post.
PieFed isn’t letting me edit the OP due to an unexpected error. The errors keep piling up, haha! [EDIT: It’s fixed now!]
Just wanted to thank all of you wonderful people for all the help you’ve given me. I love each and everyone of you (even the ones who skimmed through my post :p). A user on the other thread I created in the Arch Linux community suggested I add the nomedeset parameter, with which I managed to boot into the system. I updated it and installed linux-lts along with linux-lts-headers. Adjusted /boot/loader/entries/arch_linux.conf to switch to the lts kernel by default and rebooted the PC. Unfortunately, didn’t work but I got logs! Here’s the relevant part, I think:
mai 03 11:04:23 arch kernel: amdgpu: [powerplay] Failed message: 0xe, input parameter: 0x0, error code: 0xffffffff
mai 03 11:04:23 arch kernel: amdgpu: [powerplay] Failed message: 0x4, input parameter: 0x2000000, error code: 0xffffffff
mai 03 11:04:23 arch kernel: [drm:resource_construct [amdgpu]] *ERROR* DC: unexpected audio fuse!
mai 03 11:04:23 arch kernel: [drm] Display Core v3.2.316 initialized on DCE 12.0
mai 03 11:04:23 arch kernel: amdgpu 0000:0a:00.0: [drm] *ERROR* No EDID read.
mai 03 11:04:23 arch kernel: amdgpu 0000:0a:00.0: [drm] *ERROR* No EDID read.
mai 03 11:04:23 arch kernel: amdgpu 0000:0a:00.0: [drm] *ERROR* No EDID read.
mai 03 11:04:23 arch kernel: amdgpu 0000:0a:00.0: [drm] *ERROR* No EDID read.
mai 03 11:04:23 arch kernel: [drm] Timeout wait for RLC serdes 0,0
mai 03 11:04:23 arch kernel: [drm] kiq ring mec 2 pipe 1 q 0
mai 03 11:04:23 arch kernel: amdgpu 0000:0a:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring kiq_0.2.1.0 test failed (-110)
mai 03 11:04:23 arch kernel: [drm:amdgpu_gfx_enable_kcq [amdgpu]] *ERROR* KCQ enable failed
mai 03 11:04:23 arch kernel: [drm:amdgpu_device_init.cold [amdgpu]] *ERROR* hw_init of IP block <gfx_v9_0> failed -110
mai 03 11:04:23 arch kernel: amdgpu 0000:0a:00.0: amdgpu: amdgpu_device_ip_init failed
mai 03 11:04:23 arch kernel: amdgpu 0000:0a:00.0: amdgpu: Fatal error during GPU init
mai 03 11:04:23 arch kernel: amdgpu 0000:0a:00.0: amdgpu: amdgpu: finishing device.
I did a search and it seems like it’s the GPU’s fault due to the ring errors. I think. I remembered I have an old nvidia GPU laying around so I’m going to try to reseat the current GPU and, if that doesn’t work, try the old one. Not sure if I have to uninstall the amd drivers or if it’s ok to have both the amd and nvidia drivers installed. If that doesn’t work, I’m going to go through all the other suggestions y’all gave me to try and pinpoint the problem.
Again, thank you so much!
debug nomedeset
It worked! I managed to boot into the system. Updated it and installed linux-lts along with linux-lts-headers. Adjusted /boot/loader/entries/arch_linux.conf to switch to the lts kernel by default and rebooted the PC. Unfortunately, didn’t work but I got logs! Here’s the relevant part, I think:
mai 03 11:04:23 arch kernel: amdgpu: [powerplay] Failed message: 0xe, input parameter: 0x0, error code: 0xffffffff
mai 03 11:04:23 arch kernel: amdgpu: [powerplay] Failed message: 0x4, input parameter: 0x2000000, error code: 0xffffffff
mai 03 11:04:23 arch kernel: [drm:resource_construct [amdgpu]] *ERROR* DC: unexpected audio fuse!
mai 03 11:04:23 arch kernel: [drm] Display Core v3.2.316 initialized on DCE 12.0
mai 03 11:04:23 arch kernel: amdgpu 0000:0a:00.0: [drm] *ERROR* No EDID read.
mai 03 11:04:23 arch kernel: amdgpu 0000:0a:00.0: [drm] *ERROR* No EDID read.
mai 03 11:04:23 arch kernel: amdgpu 0000:0a:00.0: [drm] *ERROR* No EDID read.
mai 03 11:04:23 arch kernel: amdgpu 0000:0a:00.0: [drm] *ERROR* No EDID read.
mai 03 11:04:23 arch kernel: [drm] Timeout wait for RLC serdes 0,0
mai 03 11:04:23 arch kernel: [drm] kiq ring mec 2 pipe 1 q 0
mai 03 11:04:23 arch kernel: amdgpu 0000:0a:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring kiq_0.2.1.0 test failed (-110)
mai 03 11:04:23 arch kernel: [drm:amdgpu_gfx_enable_kcq [amdgpu]] *ERROR* KCQ enable failed
mai 03 11:04:23 arch kernel: [drm:amdgpu_device_init.cold [amdgpu]] *ERROR* hw_init of IP block <gfx_v9_0> failed -110
mai 03 11:04:23 arch kernel: amdgpu 0000:0a:00.0: amdgpu: amdgpu_device_ip_init failed
mai 03 11:04:23 arch kernel: amdgpu 0000:0a:00.0: amdgpu: Fatal error during GPU init
mai 03 11:04:23 arch kernel: amdgpu 0000:0a:00.0: amdgpu: amdgpu: finishing device.
I did a search and it seems like it’s the GPU’s fault due to the ring errors. I think. I remembered I have an old nvidia GPU laying around so I’m going to try to reseat the current GPU and, if that doesn’t work, try the old one. Not sure if I have to uninstall the amd drivers or if it’s ok to have both the amd and nvidia drivers installed.
EDIT in case you missed it: So, I changed the GPU to a different PCIe slot and everything’s working fine so far. I’m not celebrating just yet because when this first happened a few months ago, I’d hard reset the PC and everything would work fine. But if I shut it down and let it pass like 12 hours before I’d power it on again, the problem would reappear. So I’m just basically waiting for tomorrow now.
Will do it tomorrow, thanks!
I tried adding the kernel parameter mentioned in that thread but it didn’t work. But thank you anyway!
Regarding your edit: no, I haven’t tried that, but I will keep those suggestions in mind, thanks!
Yeah, it might be the dreaded hardware problem, then.
Yep, has to be for the future, unfortunately, can’t access my Arch system in any way right now, even with a live iso :(. But thanks!
No, I had to use the latest one. Nope, tried the Ubuntu live ISO but it also didn’t work.
Will try that after doing what Zikeji suggested. Thanks!
Those are all good tips, thanks! Will do that tomorrow and report back.
Yep:
Suzume Somemiya’s magical girl spinoff manga for Asato Asato’s 86 light novel series
EDIT: If you follow the link to the light novel page and read the plot summary, you’ll notice it’s that 86.
No problem!
There’s also the DTM but they kinda lost their unique appeal and are more akin to a regular GT3 series these days, as far as I can tell. The Intercontinental GT Challenge, on the other hand, seems pretty interesting, when looking at its calendar. I mainly follow the Nürburgring 24 Hours but am keen on watching the other races.
I’m currently watching WEC these days, which is pretty fun, but that’s good to know about IMSA. Will have to check out some races.
If you’re okay with sports car racing series, there’s Japan’s Super GT and North America’s IMSA SportsCar Championship. I don’t really follow these 2 series, but I’ve heard good things about them, especially the latter.
No phone apps that I know of for Koha. I think it works fine on any mobile browser, though. If you know HTML, CSS, or even JavaScript you can do a ton of cool stuff on your library’s catalogue. As for FOLIO, no idea, but I don’t think any exist.
There is VideLibri but it doesn’t add any functionality you don’t already have when accessing the online catalogue of any library on your browser, so I don’t think it’s worth it. Something like the Web Opac App, which let’s you browse a ton of libraries’ catalogues in one app would be a more interesting solution. Unfortunately, it’s stopped being maintained a while ago and went closed-source, from what I can gather.
Hi! In the library I work, we use Koha, which is probably the most well-known open-source library management system. This comes with the advantage of having a big community and having a lot of answers to questions you’ll probably have, albeit the documentation is kind of all over the place. Just a heads-up, though: it only runs on Linux so, whoever is going to do the implementation must familiarize themselves with it if they haven’t done so already. It’s not a flawless system by any means but as far as open-source goes, it’s the best and most mature.
There are a few demo servers you can try on their website: https://koha-community.org/demo/
The other open-source library management system I know of is FOLIO (their repo) but I haven’t tried it or read much about it. I only know it’s way younger than Koha (created 10 years ago, I think) and that EBSCO is one of its vendors. It may use newer technology but I honestly don’t know. You can also try a demo server if you go to their wiki.
Hope it helped. If you have any questions, let me know :).
Before you start complaining about how “libraries don’t have books anymore!” The book stacks are still a 10-minute drive/bus ride away at the downtown branch. The books aren’t going anywhere. Libraries are more than just books. They are one of the few places the community can get all sorts of resources and a place to access them for free
There’s always interlibrary loans. I’m sure you can search for a book on the online catalogue and ask for it to be transferred from another branch.
Anyway, fantastic and very creative work. I wish I had a library like this near me growing up.
Iceraven, which is a fork of Fennec. Seems to have a nice compromise between privacy and usability and also tries to support more add-ons than the ones Fennec does.