ShaunaTheDead

You can download specific DLCs but I’m not entirely sure they’ll be useable. It’s worth a try. Here’s how you do it:

Open a web browser and type in steam://open/console and it should open the Steam console inside of Steam itself. Type download_depot <game_id> <depot number> for Rocksmith the game id is 205190 and you can look up the specific DLC you want on steamdb

So for example, the Pearl Jam Song Pack could be downloaded using download_depot 205190 222139

Rocksmith’s DLC SteamDB page: https://steamdb.info/app/205190/dlc/

If this DLC has been disabled as you said, this might not work, or you might need to make sure that Steam doesn’t try to update the game (which would disable the DLC again). You can do that by browsing to ~/.steam/steam/steamapps/ (assuming you’re on Linux, or just wherever your “steamapps” folder is on your PC) and find the file called appmanifest_205190.acf and set it to read only. That should prevent Steam from modifying any changes you’ve made to the game. Just remember to set it back to writable if you want to update the game again.

The game might not recognize the DLC as I said, but you should be able to access the files anyway if that’s all you wanted. They’ll be in ../steamapps/downloading at least until the download is complete, then it should try to apply the DLC to the game, which might cause the files to get deleted. I’m not entirely sure about that.

It actually kinda makes sense. Two sounds that a U commonly makes are “OO” like in “yule” and “UH” like in “just”. If you say “OO-UH” close enough together it makes the sound of a W.

As a transgender woman, I have personally experienced that hormone replacement therapy (HRT) – which includes estrogen as well as testosterone blockers – slowed down my facial hair growth and thinned out of my facial hair. So testosterone levels play a small part in facial hair growth. However, I doubt that the levels within a cisgender male would vary enough to cause any significant changes.

It’s probably just that there’s a fair bit of hair growth that happens before the hairs reach the surface of your skin, like a millimeter or two. When you shave, it only has to grow back enough to pop out over the surface of the skin. If you were to pluck a hair with a pair of tweezers, it would take at least a couple of weeks to grow back. I have done exactly that many times, so at least for me that’s the time frame.

If you open /usr/share/plasma/plasmoids/org.kde.plasma.icon/main.qml and search for line there’s a section called PlasmaExtras.ShadowedLabel which seems to correspond with icon text and there’s a line maximumLineCount: 2 you could try reducing that to 1 and it might fix your issue.

It looks like KDE Plasma is based on QT6 and the icons I believe are a QT6 Label so you can also add some styling to it yourself. Here’s the documentation for it: https://doc.qt.io/qt-6/qml-qtquick-controls-label-members.html

There is a property called lineHeight so you could just add that to the PlasmaExtras.ShadowedLabel and see if that fixes it.

Weird. I was just having an issue with pamac and started using paru as a backup and paru is working fine last I checked.

Well it seems like Wikipedia’s list of countries is pretty sparse. They only have USA, Canada, Australia, New Zealand, UK, EU, and Brazil.

It’s extremely confusing but there are basically 2 measurements systems for food energy:

There’s kilocalories (abbreviated as cal) and there’s kilojoules (abbreviated as kJ). It can get very confusing because some places will label them calories (cal) and Calories (kJ), lower and upper case respectively which is extremely confusing because 1 kJ is equivalent to 4.81 cal.

According to Wikipedia the US and Canada use kilocalories (cal or calories) and pretty much the rest of the world uses kilojoules (kJ or Calories).

https://en.wikipedia.org/wiki/Food_energy#Nutrition_labels

The main difference between the two is that kilocalories are a measure of heat energy, where 1 kilocalorie is the heat needed to warm 1 liter of water by 1 degree celcius. Whereas a kilojoule is a measure of energy usually described by force in newtons.

They’re both actually from the metric system, but kilocalorie is the old and obsolete form while kilojoules is the currently accepted metric measurement.

You should go for a distro that matches what you want out of your system. You want stable? Find some strong LTS distro like Ubuntu. You want ULTRA STABLE? Go for an immutable distro. Do you want to use your system for gaming? Go for a distro with wide gaming support, built-in drivers with options for proprietary drivers.

It’s less about what base distro you’re using and more about what you like about that particular flavor of distro.

For example, I use my PC for gaming mostly, but also coding. I switched from Pop! (Ubuntu based) to Garuda (Arch based) and I love it because it’s really good for gaming, comes with Mangohud, Gamemode, Steam, Heroic, controller drivers, graphics drivers, etc, all optionally pre-installed. I also really like KDE apps because they’re performant and slick so I got the Plasma version.

Anyway, yeah, focus less on “this distro is Arch based” and more on what each distro can provide you as far as your personal tastes.

Mispronounced words by British people are unacceptable though. The Brits need to be stopped!

Current Linux market share worldwide for desktops is at ~4%. There’s also ~2% ChromeOS which is Linux based so I don’t know why it’s listed separately. As well as ~6% other which is probably Linux with privacy settings turned on.

If we go back 5 years in Linux desktop usage, the high end is including the “Other” category.

2019: ~2% to ~9% 2020: ~2.5% to ~5% 2021: ~3.5% to ~11.5% 2022: ~4.5% to ~10.5% 2023: ~6.5% to ~10% 2024: ~6% to ~12%

There is definitely a growing trend, the user base has grown somewhere between 33% and 300% depending on whether you include the “Other” category, which I personally think is a pretty safe assumption since for most PC users if it’s not Windows or Os X, it’s Linux.

Here’s where I got the data from: https://gs.statcounter.com/os-market-share/desktop/worldwide

“Matt” paste? Isn’t it “matte” or am I taking crazy pills again?

Edit: What the fuck… It’s spelled differently in the UK, the US, and Canada (where I’m from). It’s matte in Canada, mat in US, and matt in the UK.

From the Government of Canada website: https://www.noslangues-ourlanguages.gc.ca/en/writing-tips-plus/matte-mat-matt

LTS just means Long Term Support in case you weren’t aware. It means no new development is happening, but security exploits will be patched as soon as they arise.

If you just want stability, LTS is the way to go. If you want all the cutting edge bells and whistles and are okay with potentially some instability (but probably not much) then use the latest version.

If your device isn’t connected to the internet during general use then I wouldn’t worry too much about updating anything. Security fixes aren’t important if there’s no way to connect to your device.