Has anyone actually successfully installed PostmarketOS on an old device recently? I’ve had a long struggle through trying to prepare a Nexus 7 (2012) and the result seems to be a dead device before I even got to actually installing PostmarketOS.
The rough steps I followed are listed here:
- Create backups
- Get SBK
- Build and prepare U-Boot
- Actually flashing U-Boot seems to be where things went wrong
- Running
./run_bootloader.sh -s T30 -t ./bct/grouper.bct -b ../re-crypt/repart-block.bin
or./run_bootloader.sh -s T30 -t ./bct/grouper.bct -b ../generated-wheelie-blobs/AndroidRoot/blob.bin
fromfusee-tools
hung onwaiting for bootloader to initialize
- Running
./run_bootloader.sh -s T30 -t ./bct/grouper.bct -b ../u-boot/u-boot-dtb-tegra.bin
failed like this - skipping that step and running
./utils/nvflash_v1.13.87205 --resume --rawdevicewrite 0 1024 ../re-crypt/repart-block.bin
hung on[
] - Consulting a different version of the docs and running
./wheelie --blob ./generated-wheelie-blobs/AndroidRoot/blob.bin
seemed to work so I ran./nvflash --resume --rawdevicewrite 0 1024 ./re-crypt/repart-block.bin
which also seemed to work - I then powered off as instructed and the device has been completely unresponsive since
- Running
- Actually flashing U-Boot seems to be where things went wrong
I’ve tried connecting to a charger, disconnecting and reconnecting the battery, and every combination of holding down buttons but it appears to be completely dead. Any suggestions as to what I did wrong or anything I might be able to do now? Obviously it’s not the end of the world to have lost a 13 year old tablet that was just gathering dust, but at the moment I’m not feeling positive about ever trying this again on another device!
U need to reflash uboot and it only possible via dissambly cause uboot is bios of phones Any button will not work because button responses is coming from uboot firmware
How would I do that?
Uart! Tx & Rx pin maybe or you have to use qualcomm download mode
Any guides or further reading you can point me to for this?
@smeg Oh man. Good luck. I hope somebody here has some idea what to do. (@sideofburritos has some excellent how-to videos. Might be worth a look.)
Apparently nobody does :(
A quick search for sideofburritos isn’t giving me anything, did you have a particular video in mind?