cross-posted from the Linux phones community as nobody there knew
Has anyone actually successfully installed PostmarketOS on an old device recently? I’ve had a long struggle through trying to prepare a Nexus 7 (2012) and the result seems to be a dead device before I even got to actually installing PostmarketOS.
The rough steps I followed are listed here:
- Create backups
- Get SBK
- Build and prepare U-Boot
- Actually flashing U-Boot seems to be where things went wrong
- Running
./run_bootloader.sh -s T30 -t ./bct/grouper.bct -b ../re-crypt/repart-block.bin
or./run_bootloader.sh -s T30 -t ./bct/grouper.bct -b ../generated-wheelie-blobs/AndroidRoot/blob.bin
fromfusee-tools
hung onwaiting for bootloader to initialize
- Running
./run_bootloader.sh -s T30 -t ./bct/grouper.bct -b ../u-boot/u-boot-dtb-tegra.bin
failed like this- skipping that step and running
./utils/nvflash_v1.13.87205 --resume --rawdevicewrite 0 1024 ../re-crypt/repart-block.bin
hung on[
]- Consulting a different version of the docs and running
./wheelie --blob ./generated-wheelie-blobs/AndroidRoot/blob.bin
seemed to work so I ran./nvflash --resume --rawdevicewrite 0 1024 ./re-crypt/repart-block.bin
which also seemed to work- I then powered off as instructed and the device has been completely unresponsive since
I’ve tried connecting to a charger, disconnecting and reconnecting the battery, and every combination of holding down buttons but it appears to be completely dead. Any suggestions as to what I did wrong or anything I might be able to do now? Obviously it’s not the end of the world to have lost a 13 year old tablet that was just gathering dust, but at the moment I’m not feeling positive about ever trying this again on another device!
I’m going to try installing it on a Samsung tablet, but it’s a community release so I’m not sure it will work